|
|
Post by dermestid on Nov 20, 2008 10:12:58 GMT -5
Anyone know where to get the foam for the top of the air box?
|
|
|
|
Post by mjdevries on Nov 20, 2008 15:42:30 GMT -5
I just ordered a set for my 1995 from www.Boats.net for $5.30 each. They just came in this week. |
|
|
|
Post by dermestid on Nov 21, 2008 5:46:35 GMT -5
Ok thanks. I couldnt seem to find them anywhere else.
|
|
|
|
Post by racerrob6m on Nov 21, 2008 11:28:05 GMT -5
I ordered mine from Port Yamaha.
They could still get it no problem.
Went online to the parts for the Max4 & got the part no.
It was a year and half ago. Forget what I paid.
Don't know if they are still available from Yammie.
While your in the airbox, check those good ole white plastic tubes that connect the carb boots to the air box. Due to them being plastic & the age of these sleds, there have been cases of the "tabs" breaking & getting ingested by the motor. I had one break 2 years ago & get lodged in the carb so my throttle stuck half open. Fortunately, it happened on the trailer while doing some cleaning & fall prep.
They are called "pipes" if I remember correctly & I also got those thru Port Yammie. CHEAP insurance considering what a broken tab could do to a motor!!
Rob
|
|
|
|
Post by dermestid on Nov 22, 2008 5:55:33 GMT -5
Thanks I will have to check those out as well. But right now my motor is in a million peices while I search for a crank.
|
|
ike
New Member
Posts: 8
|
Post by ike on Nov 24, 2008 8:01:52 GMT -5
 Ike |
|
daman
New Member
Posts: 2
|
Post by daman on Nov 25, 2008 10:24:34 GMT -5
you can still get them from yamaha...
|
|
ike
New Member
Posts: 8
|
Post by ike on Nov 25, 2008 10:35:39 GMT -5
Just ordered new one from Yamaha. Went and opened frozen hood after a snow storm and broke one those foams. I had a cover on my sled, but still..
Ike
|
|
|
|
Post by GOLIONS on Nov 25, 2008 10:48:49 GMT -5
I learned my lesson a long time ago, always take them off before you put it away for the night - same goes with the clutch guard pins.
|
|
|
|
Post by mikevmax on Feb 3, 2009 18:33:44 GMT -5
learning lesson for the foam on the air box. I have placed or rubbed Vaseline on the top of the foam and it has saved the foam from ripping off on the hood. Not to much just enough.
|
|
! 
