|
Post by procharged04 on Dec 1, 2008 23:52:11 GMT -5
I took my brake of my 92vmax4 to install a m-10. The problem is when i put the brake caliper back over the disc and tighten it wont allow the brake disc to turn. I have loosened the brake cable all the way still wont let the disc turn???
|
|
|
Post by vmax535 on Dec 3, 2008 10:25:50 GMT -5
Remove the silvery/gold cap on the self adjuster. Remove the self-adjusting gear assemble. Take a flat headed screw driver and turn out the adjuster. This will back-off the plunger that moves the brake pad. Reassemble.
|
|